ARC'TERYX LEAF SIZING CHARTS

The measurements outlined in the Sizing Charts below refer to your own body measurements unless otherwise specified.

PRODUCT LAYERING INFORMATION

Arc'teryx LEAF garments and products are designed to work with each other as part of an integrated layering system. It is therefore not necessary to order mixed size-ranges of garments. Instead, chose your garments based on your body size and the suggested size-range for your dimensions. For example , a size medium base layer piece will fit underneath a medium mid layer piece, which will fit underneath a medium outer layer shell or halfshell jacket.

HOW TO FIND YOUR MEASUREMENTS

Sleeve: With your arms in a slightly bent position, measure from the centre of the back of your neck, along the length of your arm, to the wrist

Chest/Bust: Measure around your chest/bust, holding the measuring tape under your armpit

Waist: Measure around your waist at the narrowest part

Hip: Measure around your hips at the widest part

Crotch to Ankle: From a standing position, measure from your crotch to your ankle

---

JACKET/SHIRT SIZING

Calculate your own body measurements, then select your product size.

 

---

PANT SIZING

Actual pant length will vary according to product end use.

Harness Sizing Chart

Size ranges are guidelines only and will vary with the type of clothing worn during measurement.
Harnesses fit differently on different individuals even when measurements are the same sizes and are based on actual body dimensions.

 

---

Glove Sizing

How to Find Your Measurements 

Length: With your hand open, measure from the tip of your middle finger, down to the crease at the base of your palm

Width: With your hand open, measure around the circumference of your hand, at the base of your knuckles

 

 

 

---

Hat Sizing Chart

How to Find Your Head Measurements

Circumference: Head sizing is based on the circumference around the head.
Measure the distance around the widest part of your head, then reference the table below to find your required size.

Calculate your measurements, by measuring around your head, then select your product size.

---

The Arc’teryx Abbreviation Language

 

RAILRIDERS

Sizing Chart

Follow Instructions and Guides Below (for best results, measure only over undergarments)

Men's Measuring Instructions: CHEST: With arms relaxed at your sides, measure around your chest just below armpits, over the highest part of your chest and shoulder blades, keeping the tape parallel to the floor. WAIST: Measure around your natural waist, at the point where you would normally wear a belt. SLEEVE LENGTH: With arm slightly bent measure from center back across shoulder point to elbow and down to wrist. NECK: Measure around the middle of your neck (at the Adam's apple), keeping one finger between your neck and the tape measure for a comfortable fit. HIP/SEAT: Standing with feet together, measure around fullest point of seat, keeping tape parallel to floor. INSEAM: Using pants that fit well, measure from the crotch seam to bottom of cuff.

Men's Sizing	Small	Medium	Large	X-Large	XX-Large
Chest	36-38	39-41	42-45	46-49	50-52
Waist	30-32	33-35	36-38	39-41	42-44
Sleeve	34	35	36	37	38
30" Inseam	30	30	30	30	30
Reg Inseam	32	32.5	33	33.5	33.5
Tall Inseam	34.5	35	35.5	36	36
Fixed Waist	32 34 36 38 40 42
Inseam	32.5 33 33.5 34 34.5 35
*Tall sizes have approximately a 2 1/2" longer inseam and a 1" longer rise.

---

Women's Measuring Instructions: CHEST: With arms relaxed at your sides, measure the fullest part of the bust, keeping the tape parallel to the ground. WAIST: Measure around your waist, at the narrowest part, near your navel. (*this may be higher on your waist than you normally wear your pants) SLEEVE LENGTH: With arm slightly bent measure from center back across shoulder point to elbow and down to wrist. NECK: Measure around the middle of your neck (at the Adam's apple), keeping one finger between your neck and the tape measure for a comfortable fit. HIP/SEAT: Standing with feet together, measure around fullest point of seat, keeping tape parallel to floor. INSEAM: Using pants that fit well, measure from the crotch seam to bottom of cuff.

Women's Sizing	X-Small 2-4	Small 4-6	Medium 8-10	Large 12-14	X-Large 16-18
Bust	33	34-35	36-37	38.5-40	41.5
Waist	25.5	26.5-27.5	28.5-29.5	31-32.5	34
Hip	35.5	36.5-37.5	38.5-39.5	41-42.5	44
Arm Length	39.625	30-30.375	30.75-31.125	31.5-31.875	32.25
Inseam	29.5	30	30.5	31	31.5
Low Rise: 2" or more below the navel.			Mid Rise: 1" to 2" below the navel.

---

Adult Hat Sizes	Small	Medium	Large	X-Large
Head Circum.	20-21.75	21-22.75	22-23.75	23-24.75

OAKLEY SIZING CHARTS 

MEN'S APPAREL SIZING

 

---

GLOVE SIZING

	Palm Width
	Inches	Centimeters
X-Small	5.5-6.5	14-16.5
Small	6.5-7.5	16.5-19
Medium	7.5-8.5	19-21.5
Large	8.5-9.5	21.5-24
X-Large	9.5-10.5	24-27
XX-Large	› 10.5	› 27

 

---

OAKLEY MEN'S FOOTWEAR

 

---

MEN'S SOCK SIZING

Salomon FORCES Sizing Chart

 

 

 

 

 

G-Code

When buying a belt, it is important to select the correct size based upon an accurate measurement. Your belt size is not the same as your pant or waist size; because your belt goes around you and your pants, tucked in shirt, and your underwear. Your belt size is usually 1 or 2 inches larger than your pant or waist size.

G-CODE belts are primarily designed as an outer load bearing belt to carry your holster, magazine carriers, blow-out kit and any other essential items needed. G-CODE belts can also be worn in your belt loops just to hold your pants up.

That in mind, to get a proper measurement for your belt size using a tape measure, measure around what you will be wearing to determine what size belt you will need in inches. G-CODE Belts are measured by the actual usable length of the belt inside circumference, with a 4 inch adjustment parameter. Example: a Large belt inside minimum circumference is 36 inches and can be adjusted out to 40 inches. If your measurement is between 36 and 40 inches, you will need a Large.